Filter
Top Products
Various Functions for Playing Discs
53
US
When the sound does not match the pictures on
the screen, you can adjust the delay between the
picture and sound.
1 Press DISPLAY when the system is
in stop mode.
The Control Menu appears.
2 Press X/x to select [A/V SYNC],
then press .
The options for [A/V SYNC] appear.
3 Press X/x to select the setting you
want and press .
The default setting is underlined.
•[OFF
]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
The selected setting takes effect.
Note
• Depending on the input stream, this function may not
be effective.
Some Super Audio CDs consist of a Super
Audio CD layer and a CD layer. You can select
the playback layer you want to listen to.
Press SA-CD/CD when the system is in
stop mode.
Each time you press the button, a Super Audio
CD layer or a CD layer is alternately selected.
When playing a Super Audio CD layer,
“SA-CD” lights up in the front panel display.
Note
• For details about Super Audio CD discs, see page 91.
• Each play mode function works only within the
selected layer.
• You cannot change a playback layer during playback.
• Super Audio CD audio signals are not output from the
HDMI OUT (high-definition multimedia interface
out) jack.
Adjusting the Delay
Between the Picture and
Sound
(A/V SYNC)
* *
* European models only.
OFF
ON
OFF
T
0 : 0 0 : 0 2
1
(
2 8
)
1
(
1 2
)
DVD VIDEO
Selecting a Playback
Layer for a Super Audio CD