Filter
Top Products
22
US
Getting Started – BASIC –
To adjust the volume of all the
speakers at one time
Press VOLUME –/+ on the system, or press
VOLUME +/– on the remote.
Note
• Even if an option is selected, the sound volume of the
subwoofer may be low. This is by default setting, and
is not a malfunction.
• If there is no sound from the speakers, check the
speaker connection.
• If you change the position of the speakers, or you
cannot get surround effect sufficiently, perform
[AUTO CALIBRATION] again. See “Calibrating the
Appropriate Settings Automatically” (page 73).