Filter
Top Products
Basic Operations
13
?/1
(Power)
Recording a CD
— CD Synchro Recording
The CD SYNC button lets you record from a CD
to a tape easily. You can use TYPE I (normal) or
TYPE II (CrO2) tapes. The recording level is
adjusted automatically.
x
TAPE B n
1 Press A B and insert a recordable tape
into deck B.
18, REC PAUSE/START 2
4
3
Multi stick
PUSH ENTER
Insert with the
side you want to
record facing
forward.
2 Press one of the A 1~5 buttons and
place a CD on the disc tray.
Press the same button to close the disc tray.
If the indicator for the tray you want to
record is not lit, press DISC SKIP on the
remote repeatedly until it lights.
3 Press CD SYNC.
Deck B stands by for recording and the CD
player stands by for playback. The
TAPE B N indicator (for the front side)
lights and the REC PAUSE/START button
flashes.
4 Press MODE SELECT repeatedly to
select “Set Up Mode”, then press PUSH
ENTER.
5 Move the multi stick toward b or B
repeatedly to select “TAPE Set Up ?”,
then press PUSH ENTER.
6 Move the multi stick toward b or B
repeatedly to select “Direction Set
Up ?”, then press PUSH ENTER.
7 Move the multi stick toward b or B
repeatedly to select “1 Way” to record
on one side, or “Cycle” (or “Relay”) to
record on both sides, then press PUSH
ENTER.
8 Press REC PAUSE/START.
Recording starts.
Place with the
label side up.
When you play a
CD single (8 cm
CD), place it on
the inner circle of
the tray.
continued
TAPE B N indicator