Getting Started
9
Jack type B
AM
F
M
7
5
Ω
Jack type A
A
M
FM
7
5Ω
5Connect the FM/AM antennas.
Set up the AM loop antenna, then connect
it.
Extend the FM antenna
horizontally
To connect optional components
See page 28 for details.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Do not place the rear surround speakers on top of a
TV. This may cause distortion of the colors in the
TV screen.
• Be sure to connect both left and right rear surround
speakers. Otherwise, the sound will not be heard.
• The type of speakers supplied vary according to the
model you purchased (see “Specifications” on
page 35).
• The MHC-MG110 speaker system is not
magnetically shielded. Therefore, leave a space of 5
to 10 cm or more when placing the front speakers
next to a television.
Inserting two size AA (R6)
batteries into the remote
E
e
e
E
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
AM loop antenna
AM loop antenna
6Connect the power cord to a wall outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
Note on placement
Be sure to place this unit on a horizontal place.
If the unit is slanted, it may cause malfunction
or damage to the system.
Extend the FM antenna
horizontally