Filter
Top Products
9
masterpage:Rightfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Display window description
Location and Function of Controls
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
D
Recording and editing indicators
L.SYNC indicator (19)
Lights when the deck is set to assign track numbers
automatically during analog recording.
Rec mode indicators (15)
These indicators turn off during stereo recording/
playback.
•
“MONO” lights when the deck is set to Monaural
Recording mode or playing an MD recorded in
Monaural Recording mode.
•
“LP2” lights when the deck is set to LP2 Stereo
Recording mode or playing an MD recorded in LP2
Stereo Recording mode.
•
“LP4” lights when the deck is set to LP4 Stereo
Recording mode or playing an MD recorded in LP4
Stereo Recording mode.
SYNC indicator (20)
Lights during synchro-recording.
REC indicator
Lights during recording.
TOC indicators (15) (31)
•
“TOC” lights to indicate the presence of TOC data
that has not been written to the disc. “TOC” flashes
when the TOC data is being written.
•
“TOC EDIT” lights during edit operations.
E
INPUT indicators (13)
•
“OPT” or “D-IN” lights when the program source
connected to the DIGITAL OPTICAL IN connector
is selected. For models with two digital input
connectors, “OPT1 (2)” lights when the program
source connected to the DIGITAL OPTICAL IN1
(2) connector is selected.
•
“COAX” lights when the program source connected
to the DIGITAL COAXIAL IN jack (MDS-JE640
European models only) is selected.
•
“ANALOG” or “A-IN” lights when the program
source connected to the ANALOG IN jacks is
selected.
F
Music calender
Shows all the track numbers within a grid if the MD is
a premastered disc, or without a grid if the MD is a
recordable disc. If the total number of tracks exceeds
15,
B
appears to the right of number 15 in the music
calendar.
G
SLEEP indicator (42)
Lights when the deck is set to turn off automatically
after specified minutes.
H
Level meters
Display the audio signal levels during playing and
recording.
Note
The display format that you have selected in each of the deck
statuses (play, recording, etc.) will appear whenever the deck
enters that status and you press LEVEL/DISPLAY/CHAR (or
DISPLAY) or TIME (MDS-JE640 only) until you change the
format to another (see the following sections for details). If you
disconnect the AC power cord, however, all the displays will
revert to their default (i.e., the factory set display) the next time
you turn on the deck.
To change the display in stop mode
Press LEVEL/DISPLAY/CHAR (or DISPLAY)
repeatedly to change the display.
Each press of the button changes the display as follows:
MDS-JE640
Total number of tracks, total recorded time and
disc name
1)
r
The contents of a program (only when “PGM”
lights up)
r
Level of the input signal (setting value of the
recording level)
MDS-JE440
Total number of tracks and total recorded time
r
Remaining recordable time
2)
on the MD
(recordable MDs only)
r
The contents of a program (only when “PGM”
lights up)
r
Total playing time of the program (only when
“PGM” lights up)
r
Disc name
1)
1) “No Name” appears when the disc has no name.
2) Time shown in the display differs depending on the setting of
REC MODE.