Filter
Top Products
54
masterpage:Leftfilename[\\Win-35\logitecmo\422958711MDSJE640CED\01GB03OPE-CED.fm]
Display messages
Additional Information
model name1[MDS-JE640] model name2[MDS-JE440]
[4-229-587-11(1)]
Display messages
The following table explains the various messages that
appear in the display. Messages are also displayed by the
deck’s Self-diagnosis function (see page 53).
Message Meaning
Auto Cut The Auto Cut Function is on (page 18).
Blank Disc
A new (blank) or erased MD has been
inserted.
Cannot Copy
An attempt was made to make a second
copy from a digitally dubbed MD
(page 52).
Cannot Edit
An attempt was made to edit a
premastered MD, to edit the MD
during Program or Shuffle Play or to
change the recording level of an MD
recorded in LP2 or LP4 Stereo mode.
Disc Full The MD is full (page 51).
Impossible
The deck cannot do the specified
operation (pages 14, 32 and 34).
Incomplete!(!)
The S.F Edit (changing the recording
level after recording, Fade-in, Fade-
out) operation was not performed
properly because the deck was moved
while recording was in progress or the
MD is damaged or dirty.
Initialize (flashing)
The Setup Menu settings have been
lost.
Or the contents recorded by the timer
have disappeared over time and are not
be available for saving to disc, or
Program Play could not be activated
since the program has disappeared over
time.
(The message flashes for about four
seconds when you turn on the deck by
pressing
?/1
.)
Name Full!(!)
The naming capacity of the MD has
reached its limit (about 1,700
characters).
No Change
While attempting to change the
recording level after recording, you
pressed MENU/NO without actually
changing the recording level, so no
change was made.
No Disc There is no MD in the deck.
No Name The track or disc has no name.
No Program!(!)
You tried to start Program Play when
no program exists.
Premastered
An attempt was made to record to a
premastered MD.
ProgramFull(!)
The program contains the maximum
number of tracks. You cannot add any
more tracks.
REMOTE
The MD is being controlled by an
external device connected to the deck.
1)
S.F Edit!
You attempted to perform another
operation while in S.F Edit (changing
the recording level after recording,
Fade-in, Fade-out) mode.
You cannot perform any other
operations while in S.F Edit mode.
(S.F) Edit NOW
You pressed
?/1
while in S.F Edit
(changing the recording level after
recording, Fade-in, Fade-out) mode.
If you turn off the deck while in S.F
Edit mode, any changes that you have
made will not be made properly. Finish
the changes and leave S.F Edit mode
before turning off the deck. If you
accidentally turn off the deck while
changes are being made, press
?/1
while the message is displayed.
Smart Space
The Smart Space Function is on
(page 18).
TOC Reading
The deck is checking the TOC (Table
Of Contents) on the MD.
1) If “REMOTE” appears under other circumstances, turn off
the deck, then turn it on again.
Message Meaning