Filter
Top Products
Getting Started/Basic Operations
13
4 Press CD N (or NX on the unit).
Play starts and the playing disc number is
displayed.
Playing time
Disc tray number Track number
To start playing a different CD, press
DISC 1 – 5 to select the desired disc.
To Do this
Stop play Press x.
Pause Press X (or NX on the
unit). Press again to resume
play.
Select a track Press . or > repeatedly
until you find the desired
track.
Find a point in a track Press and hold m or M
during play and release it at
the desired point.
Select a CD • Press DISC SKIP on the
remote repeatedly so that a
box appears around DISC 1
– 5 in the display. Press
CD N (or NX on the
unit) to play the selected
CD.
• Press DISC 1 – 5 on the
unit. Play starts when the
button is pressed.
If you press DISC 1 – 5 (or
DISC SKIP on the remote)
during play, the selected CD
changes and the new CD
starts playing.
Remove a CD Press DISC SKIP on the
remote repeatedly to select the
CD you want to remove. Open
the front panel and press A on
the unit.
Adjust the volume Press VOL +/–.
1 Press DISC 1 – 5 to select a disc tray,
then press A on the unit.
2 Insert a CD and push it down lightly.
Note
You cannot play a 8 cm CD.
With the label side front
A box appears around the selected disc
number in the display when the disc is
loaded.
3 Press PLAY/TUNING MODE on the
remote repeatedly to select the playing
mode.
Each time you press the button, the mode
changes;
MODE Playing
ALL DISCS all the tracks on all CDs.
1 DISC all the tracks on the
current CD.
ALL DISCS
SHUFFLE
all the tracks on all CDs
in random order (see
page 16).
1 DISC SHUFFLE all the tracks on the
current CD in random
order (see page 16).
DISC PROGRAM desired tracks on all CDs
in the order you
programed (see page 17).
continued