Filter
Top Products
22
Specifications (continued)
Sub woofer (SA-WEX200)
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohms loads, from 50 – 150 Hz; rated 30 watts
per channel minimum RMS power, with no more than
10% total harmonic distortion from 250 milli watts to
rated output.
Canadian model:
Continuous RMS power output (reference):
30 watts
(4 ohms at 55 Hz, 10%
THD)
Speaker system Active sub woofer
(magnetically shielded
design)
Speaker unit 10 cm dia, cone type
woofer (×2)
Practical maximum output 30 watts
Reproduction frequency range
45 – 150 Hz
High frequency cut-off range
70 – 150 Hz
Phase selector Normal, reverse
Input SPEAKER INPUT:
Input terminal
Output SPEAKER OUTPUT:
Output terminal
Power requirements 120 V AC, 60 Hz
Power consumption 40 watts
Dimensions Approx. 150 × 220 ×
345 mm (w/h/d, incl.
projecting parts and
controls)
Mass Approx. 6.2 kg
Design and specifications are subject to change
without notice.
AM tuner section
Tuning range 530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
Antenna AM loop antenna
External antenna terminals
Intermediate frequency 450 kHz
Satellite speaker (SS-CEX200)
Speaker system 2-way, bass-reflex type
Speaker units
Woofer: 9 cm dia., cone type
Tweeter: 5 cm dia., cone type
Impedance 4 ohms
Dimensions 130 × 220 × 183 mm
(w/h/d, incl. projecting
parts and controls)
Mass Approx 2.0 kg net per
speaker
General
Power requirements 120 V AC, 60 Hz
Power consumption 40 watts
1.8 watts (in standby
mode)
Dimensions 175 × 222 × 201 mm
(w/h/d, incl. projecting
parts and controls)
Mass Approx. 3.2 kg
Supplied accessories Remote commander with
battery (1)
AM loop antenna (1)
FM wire antenna (1)
Speaker cords (4)