Sony CMT-CP1 Stereo System User Manual


 
5
Getting Started
Jack type B
AM
ANTENNA
U
FM
75
U
3 For models with a voltage selector,
set VOLTAGE SELECTOR to the
local power line voltage.
VOLTAGE
SELECTOR
110V~120V
220V~240V
4 Connect the power cord to a wall
outlet.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Inserting two size-AA (R6)
batteries into the remote
E
E
e
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Notes on batteries
•Make sure the battery poles (plus/minus) are
properly oriented.
•Do not use a new battery with an old one.
•Do not use different types of batteries together.
•If you do not use the remote for a long period of
time, remove the batteries to prevent possible
damage from battery leakage and corrosion.
•Do not use a battery that is leaking.
•If a battery has leaked, clean the battery
compartment and replace all the batteries.
•Do not place the remote in an extremely hot or
humid place.
•Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
AM loop
antenna
Extend the FM
wire antenna
horizontally