Filter
Top Products
24
Recording your favorite CD tracks
to a tape (continued)
10
Repeat steps 6 and 7 to select tracks
to be recorded on the side of the
tape facing away from you.
11
Press CD-SYNC.
The tape stands by for recording and the
CD stands by for playback.
“ ” and “ ” appear, and the CD-SYNC
indicator lights up.
12
Press DIR MODE on the remote
repeatedly to select “
” to record
on one side of the tape, or “
”or
“
” to record on both sides.
13
Press TAPE X (or X on the remote).
Recording starts.
To stop recording
Press TAPE x (or x on the remote).
To cancel Program Edit
Press PLAY MODE (or
TUNING/PLAY MODE on the remote)
repeatedly until “PGM” disappears.
1 Press CD EJECT A and place a CD.
2 Press CD EJECT A again to close the
disc tray.
3 Press TAPE EJECT A and insert a
recordable tape.
4 Press CD.
“CD” appears.
5 Press PLAY MODE (or
TUNING/PLAY MODE on the
remote) repeatedly until “PGM”
appears.
6 Press CD . (or l on the
remote) or CD > (or L on the
remote) repeatedly until the desired
track number appears.
3 243
PGM
7 Press PLAY MODE (or
TUNING/PLAY MODE on the
remote).
8 Repeat steps 6 and 7 to add more
tracks to be recorded.
9 Press X on the remote where you
want the system to begin recording
on the side facing away from you.
When the system detects this command,
the tape pauses, reverses direction, then
continues recording the next track on the
side facing away from you.
Total playing timeSelected track
number