Filter
Top Products
Setting Up 31
EN
Setting Up
Notes
• As long as “Cd”
appears in the display,
the optical digital
output jack is in
operation and the jack
lights even if the CD is
in stop mode.
• If you play a CD-ROM
that is not for audio
use, noise may be
heard.
Recording a CD on a MiniDisc recorder and
DAT recorder
When connections are finished, turn the power on and
start recording.
* Select a connecting cable depending on the type of the
digital input jack of the recorder to be connected. For details,
refer to the instruction manual of the component to be
connected. The OPTICAL DIGITAL OUT (CD) jack of this
unit is square-shaped jack.
The type of the jack Model number of
of the component the connecting cable
to be connected
Optical miniplug POC-5AB
(MiniDisc Walkman, etc.)
L-type 7-pin connector POC-DA12P
(DAT Walkman, etc.)
Square-shaped optical POC-10A
connector (MiniDisc
recorder, DAT recorder, etc.)
To digital input
Digital Connecting
cable* POC-5AB (not
supplied)
MiniDisc
recorder, DAT
recorder, etc.
Front panel of
this player