Filter
Top Products
The Timer22
EN
Waking up to music (continued)
5 Set the timer to the hour and the minutes you want
the music to go on.
1 Press 0/– or )/+
to set the hour and
press DISPLAY/
ENTER.
2 Press 0/– or )/+
to set the minutes and
press DISPLAY/
ENTER.
6 Set the timer to the hour and the minutes you want
the music to go off (Do as step 5.)
7 Press 0/– or )/+ to set the volume you want,
and press DISPLAY/ENTER.
8 Press STANDBY.
The t indication lights up and the power goes off.
At the preset time, the power will go on and music
will fade in. Then, music will fade out and the
power will go off at the preset time, and the player
will enter the standby mode.
To check/change when the playback will start
Press TIMER/CLOCK, then DISPLAY/ENTER. Each
time you press DISPLAY/ENTER, a stored setting
lights up. Change the setting if you need to when the
setting lights up. When you finish checking, press
TIMER/CLOCK.
To use the player before a timer playback starts
If you turn on the player, you can use it as usual ( in
case of the radio, if you listen to the station which is
different from the one you tuned in in step 1 on page
21, you will hear that station at the preset time.) Turn
off the player before the preset time.
To stop play
Turn off the power.
Tips
• The display window
does not light while the
waking up timer is
operating even if the
power is on.
• You can have the
player go on the next
day at the same time.
Just press STANDBY
until the t indication
appears in the display.
The preset settings
remain until you reset
them.