Filter
Top Products
Setting Up34
3 Connecting the AC power cord
Insert the AC power cord to the wall outlet.
About the demonstration mode
The player enters the demonstration mode about 10
seconds after you connected the AC power cord to the
wall outlet. Demonstration indications such as
“DEMO MODE” and “PHC-Z10” appear in the
display one after another.
The player also enters the demonstration mode if you
do not operate the player for about one minute after
you turned it on.
To exit the demonstration mode, set the clock of the
player (page 24).
4 Inserting batteries into the remote
Insert two size AA (R6) batteries (not supplied)
Replacing batteries
With normal use, the batteries should last for about
six months. When the remote no longer operates the
player, replace all the batteries with new ones.
Hooking up the system (continued)