Filter
Top Products
The Timer28
Timer-recording radio programs (continued)
4 Set the timer to the hour and the minutes you want
to start recording.
1 Turn MULTI JOG to set the hour and press
ENTER MEM.
2 Turn MULTI JOG to set the minutes, and press
ENTER MEM.
5 Set the timer to the hour and the minutes you want
to stop recording. (Do as step 4.)
6 Turn MULTI JOG to set the volume you want, and
press ENTER MEM.
7 Press STANDBY.
The indication lights up and the power goes off;
the player enters the recording standby mode.
At the preset time, the power will go on and music
will fade in and the recording will start. Then
music will fade out and the power will go off at the
preset time, and the player will enter the standby
mode again.
To check/change the recording timer settings
Press TIMER, then ENTER MEM. Each time you press
ENTER MEM, a stored setting is displayed in the set
order. To change the setting, display the setting you
want to change and re-enter it.
Tips
• To exit the standby
mode, press STANDBY
to make the
indication disappear.
• The preset settings
remain until you reset
them.