Filter
Top Products
18-GB
In stop mode
3 Press the jog lever.
The display changes as follows.
Display window on the recorder
While recording
In stop mode
z
The display that appears on the remote control
is different from the ones on the recorder. See
“On the remote control” (page 19) to check the
display that appears on the remote control.
To know the recording
condition
The indicator lights up or flashes
according to the recording condition.
Whether you use the controls on the
recorder or the remote control, the REC
indicator lights up or flashes in the same
way.
1)
Of the figures in column B, the second
indicates the number of displayable items and
the first indicates the order of the selected
item.
For example, when “1/3” is indicated for
“LapTime”, it means the first of three
selectable items is being displayed.
AB
1)
1)
Of the figures in column B, the second
indicates the number of displayable items and
the first indicates the order of the selected
item.
For example, when “1/4” is indicated for
“LapTime”, it means the first of 4 selectable
items is being displayed.
LapTime 1/4
RecRemain 2/4
AllRemain 3/4
Clock 4/4
AB
Track number Elapsed time
Track number Remaining time for
recording
Current date
1)
1)
Appears only when the clock is set.
Current time
1)
A
B
AB
Track number Elapsed time
Track name
1)
1)
Appears only if the track has been labeled.
Remaining time for
recording
Disc name
1)
Remaining time after
the current location
Current date
2)
2)
Appears only when the clock is set.
Current time
2)
Recording
condition
REC indicator
While recording lights up
flashes according
to the loudness of
the source while
recording with a
microphone (voice
mirror)
Recording standby flashes
Less than 3
minutes’
recording time
available
flashes slowly
A track mark has
been added (when
controlling by the
recorder only)
goes off
momentarily