Sony MZ-R700PC MiniDisc Player User Manual


 
61
Hi DC in
Voltage of the power supply is too high (The supplied AC power
adaptor is not used).
Use the supplied AC power adaptor.
HOLD
The recorder is locked.
Move HOLD against the arrow to unlock the recorder (pages 12,
38).
LOW BATT
Battery is weak.
Charge the rechargeable battery or replace the dry battery
(page 11).
MEM OVER
You tried to record with the recorder placed where it receives
continuous vibration.
Put the recorder on a stable place, and start recording again.
NO COPY
You tried to make a copy from a disc that is protected by the Serial
Copy Management System. You cannot make copies from a
digitally connected source which was itself recorded using digital
connection.
Use analog connection instead (page 23).
NO DISC
You tried to play or record with no disc in the recorder.
Insert an MD.
NO SIGNAL
The recorder could not detect digital input signals.
Make sure that the source is connected firmly (page 14).
P/B ONLY
You tried to record or edit on a premastered MD (P/B stands for
playback).
Insert a recordable MD.
PROTECTED
You tried to record or edit on a MD with the tab in the record-
protect position.
Slide the tab back (page 54).