Sony MZ-R700PC MiniDisc Player User Manual


 
57
NO SIGNAL appears in the display when recording from
a portable CD player.
There is no digital signal from the portable CD player.
When recording digitally from a portable CD player, use AC
power adaptor and disable the anti-skip function (such as ESP)
on the CD player (page 16).
There is no recording after a recording operation.
The AC power adaptor was unplugged or a power outage occurred
during recording.
The lid does not open.
The power sources have been disconnected during recording or
editing, or the battery have been exhausted.
Set the power sources again, or replace the exhausted battery
with new ones.
No sound comes through the headphones/earphones.
The headphones/earphones plug is not firmly connected.
Plug in the plug of the headphones/earphones firmly to the
remote control. Plug in the plug of the remote control firmly to
i.
Volume is too low.
Adjust the volume by pressing VOL +/.
Volume cannot be turned up.
AVLS is on.
Set AVLS to AVLS OFF (page 37).
An MD is not played from the first track.
Disc playing stopped before it came to the last track.
Press . repeatedly to go back to the beginning of the disc,
and restart playing after checking the track number in the
display.
Playback sound skips.
The recorder is placed where it receives continuous vibration.
Put the recorder on a stable place.
A very short track may cause sound to skip.
Sound has a lot of static.
Strong magnetism from a television or such device is interfering
with operation.
Move the recorder away from the source of strong magnetism.