Sony MZ-R700PC MiniDisc Player User Manual


 
41
Editing recorded tracks
You can edit your recordings by adding/erasing track marks or
labeling tracks and MDs. Premastered MDs cannot be edited.
Notes on editing
Do not move or jog the recorder while TOC Edit* is flashing in the display.
You cannot edit tracks on an MD that is record-protected. Before editing
tracks, close the tab on the side of the MD (page 54).
If you perform an editing operation while playing, be sure not to turn the
power off until TOC Edit disappears in the display.
The lid does not open until TOC Edit disappears in the display after
editing.
TOC = Table of Contents
When you operate the recorder with the supplied remote control, use
the buttons and controls shown in parentheses.
Erasing tracks
To erase a track
Note that once a recording has been erased, you cannot retrieve it.
Make sure of the track you are erasing.
1 While playing the track you want to erase, press ENTER (EDIT
for 2 seconds or more).
ENTER
<MENU,
T MARK
ENTER
EDIT
>/.
T MARK
continued