Filter
Top Products
Editing Recorded MDs
filename[D:\Data Folder\sem\4238553111MDSJE480CEL\GB05OPE-CEL.fm]
model name1[MDS-JE480]
[4-238-553-11(1)]
masterpage:Left
(3 column)
21
GB
You can use this function to change the order of
any track on the disc. When you move tracks,
the tracks are automatically renumbered.
Example: Moving track 3 to position 2.
1
While the deck is stopped, playing, or
paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS (or press ./>
repeatedly) until “Move?” appears, then
press PUSH ENTER or YES.
3
Turn AMS (or press ./>
repeatedly) until the number of the track
to be moved appears, then press PUSH
ENTER or YES.
4
Turn AMS (or press ./>
repeatedly) until the new track position
appears, then press PUSH ENTER or
YES.
“Complete!” appears and the deck starts to
play the moved track.
You can enter a name for a recorded MD as well
as for individual tracks. Names can consist of
uppercase and lowercase letters, numbers, and
symbols. A total number of about
1,700 characters can be stored for all the names
on the MD.
Naming a track or an MD
using the controls on the
deck
1
While the deck is stopped, playing,
recording, or paused, press MENU/NO.
“Edit Menu” appears in the display.
2
Turn AMS until “Nm In?” appears, then
press PUSH ENTER or YES.
While the deck is recording, a flashing
cursor appears in the display and you can
enter a name for the track being recorded. In
this case, go to step 4.
3
Turn AMS until the track number (when
naming a track) or “Disc” (when naming
the MD) flashes, then press PUSH
ENTER or YES.
A flashing cursor appears.
The deck starts playing and you can name a
track while monitoring the sound.
4
Press LEVEL/DISPLAY/CHAR
repeatedly to select the character type.
Each time you press the button, the display
changes cyclically as follows:
(Blank space)
t
A (Upper cases)
t
a
(Lower cases)
t
0 (Numbers)
t
’ (Symbols)
To enter a space
Press M while the cursor is flashing. You
cannot enter a space as the first character.
5
Turn AMS to select the character.
The selected character flashes.
To enter a symbol
You can use the following symbols in titles:
’ – / , . ( ) : ! ? & + < > _ = ” ; # $ % @ * `
To change a selected character
Repeat steps 4 and 5.
6
Press PUSH ENTER.
The selected character is entered and lights
continuously. The cursor shifts to the right,
flashes, and waits for the input of the next
character.
Moving recorded tracks
— Move Function
Naming a track or an MD
— Name Function
123
1
23
4
4
A
ACBD
BC D
Track
number
Original
tracks
After
MOVE
continued