Filter
Top Products
masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-HPX10W-HPX9-
HPX7\DTP\4255291112\425529111CMTHPX10WCEL\GB10OPT-CEL.fm]
24
GB
model name[CMT-HPX10W/CMT-HPX9/CMT-HPX7]
[4-255-291-11(2)]
(CMT-HPX10W only)
Hooking up the transmitter
1 Set the transmitter by the following
procedures.
Select either AUDIO IN A or AUDIO IN B
hook up depending on the jack type of the
optional component you want to connect
the transmitter to.
2 Connect the transmitter to a wall outlet
using the supplied AC power adaptor.
The transmitter automatically turns on.
Notes
• The NOISE FILTER effects the sound only when
you connect an optional component to the AUDIO
IN A jacks of the transmitter. Connecting to the
AUDIO IN B jack, the switch has no effect.
• When you connect the transmitter to the analog out
jacks, do not set the NOISE FILTER to ON.
Otherwise, the volume will be limited.
• If stereo mini jack is connected to LINE OUT and the
NOISE FILTER is set to ON, audio output will be
reduced and audio signal may be intermittent or auto
muting will activate. In this case, set the NOISE
FILTER to OFF.
• While WIRELESS is selected as the function,
bumping the transmitter or the unit may produce
noise.
• Use only the supplied AC power adaptor. Do not use
any other AC power adaptor.
• If the connected component has the AVLS
(Automatic Volume Limiter System) function, be
sure to turn off the function when using the
transmitter. Otherwise, you will have to turn up the
volume of the speaker, and that may cause distortion.
• If the connected component has the BASS BOOST
or MEGA BASS function, be sure to turn off the
function when using the transmitter. Otherwise, the
sound from the speaker may be distorted.
• If the transmitter does not detect an audio signal for
a few minutes, the power on the transmitter
automatically turns off. When the transmitter
receives an audio signal again, the power
automatically turns on.
Transmitter
DC IN 9V
OFF ON
FILTERNOISE
123
CHANNEL
RBAL
AUDIO IN
Transmitter
to AUDIO IN B
jack
to AUDIO IN A
jack
Right
channel
(red)
Left
channel
(white)
Connecting
cord (supplied)
Unimatch plug
adaptor (not
supplied)
Right
channel
(red)
Left
channel
(white)
to LINE OUT or
REC OUT jack
to headphones
jack (stereo
phone jack) of
optional
components
Personal
computer, etc.
Optional
Components
(TV, VCR,
Personal
computer, etc.)
to DC IN 9V jack
Transmitter
AC power adaptor
(supplied)
Polarity of the plug