Filter
Top Products
CD/MP3 – Play
masterpage:Right
filename[\\Nas-data-server\SONY Current jobs\SONY CMT-HPX10W-HPX9-
HPX7\DTP\4255291112\425529111CMTHPX10WCEL\GB06CDP-CEL.fm]
13
GB
model name[CMT-HPX10W/CMT-HPX9/CMT-HPX7]
[4-255-291-11(2)]
You can make a program of up to 25 steps from
all the discs in the order you want to play them.
You can synchro record the programed tracks
onto a cassette tape (page 18).
Use buttons on the remote for the operation.
1 Press CD (or FUNCTION repeatedly)
until “CD” appears.
2 Press PLAY MODE in stop mode
repeatedly until “PGM” appears.
3 Press DISC SKIP repeatedly (or press
one of the disc buttons (DISC 1 – 5 and
DISC +1) on the unit) to select a disc.
To program all the tracks on a disc at once,
proceed to step 5 with “AL” displayed.
4 Press ./> repeatedly until the
desired track number appears.
When programing an MP3, press ALBUM
+/– to select an album, then press ./
> repeatedly until the desired track
number appears.
5 Press ENTER (or PLAY MODE on the
unit).
The track is programed.
The program step number appears,
followed by the total playing time.
6 Program additional discs or tracks.
7 Press N (or CD/NX on the unit).
Program Play starts.
Other operations
Tips
• The program you made remains after Program Play
finishes. To play the same program again, press CD
(or FUNCTION on the unit repeatedly) until “CD”
appears, then press N (or CD/NX on the unit).
However, the program is cleared when you press Z
on the unit.
• “– –.– –” appears when the total CD program time
exceeds 100 minutes, or when you select a disc with
20 tracks or more, or when you select an MP3 audio
track.
Creating your own
program
— Program Play
Selected track number
Total playing time
Current disc
To program Repeat steps
Other discs 3 and 5
Other tracks on the
same disc
4 and 5
Other tracks on
other discs
3 to 5
To Do this
Cancel Program
Play
Press PLAY MODE in stop
mode repeatedly until “PGM”
disappears.
Clear a track from
the end
Press CLEAR in stop mode.