Filter
Top Products
8
Hooking up the system (continued)
To attach the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Note
Keep the speaker cords away from the antennas to
prevent noise.
Using the remote
You can use the buttons shown below to
operate a Sony TV.
To Press
Turn the TV on or
off
TV ?/1.
Switch the TV’s
video input
TV/VIDEO.
Change the TV
channels
TV CH + or –.
Adjust the volume
of the TV
speaker(s)
TV VOL + or –.
When carrying this system
Perform the following procedure to protect
the CD mechanism.
1 Make sure that all discs are removed
from the unit.
2 Hold down CD and then press ?/1 until
“STANDBY” appears.
When you release the buttons, “LOCK”
appears.
3 Unplug the AC power cord.
Inserting two R6 (size AA)
batteries into the remote
E
E
e
e
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates the
system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.