Sony MHC-VX333 Stereo System User Manual


 
28
Singing along: Karaoke (continued)
Waking up to music
Daily Timer
You can wake up to music at a preset time.
Make sure you have set the clock (see Setting
the time on page 9).
1 Prepare the music source you want to
play.
CD: Load a CD. To start from a
specific track, make a program (see
Programing CD tracks on page 11).
Tape: Load a tape with the side you
want to play facing forward.
Radio: Tune in the preset station you
want (see Listening to the radio on
page 20).
2 Adjust the volume.
3 Press CLOCK/TIMER SET on the
remote.
SET DAILY 1 appears.
4 Press v or V repeatedly to select
DAILY 1 (or 2), then press ENTER.
ON appears and the hour indication
flashes.
5 Set the time to start playing.
Press v or V repeatedly to set the hour,
then press B.
The minute indication flashes.
Press v or V repeatedly to set the minute,
then press ENTER.
6 Repeat step 5 to set the time to stop
playing.
7 Press v or V repeatedly until the music
source you want appears.
The indication changes as follows:
t
TUNER
y
CD PLAY
T
t
TAPE PLAY
T
To stop recording
Press x.
Tips
If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
If you want to record your voice through the
microphone only, you can do so by selecting the
CD function and not playing a CD.
When high level sound signals are input, the system
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control function).
Falling asleep to music
Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep to
music.
Press SLEEP on the remote.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90 t 80 t 70 t
t 10 t
OFF
* The system turns off when the current CD or tape
finishes playback (for up to 100 minutes).
Other Operations
To Press
Check the
remaining time
SLEEP on the remote once.
Change the
time to turn off
SLEEP on the remote
repeatedly to select the time you
want.
Cancel the Sleep
Timer function
SLEEP on the remote
repeatedly until SLEEP OFF
appears.