Filter
Top Products
22
Recording to a tape
— CD Synchro Recording/Recording Manually/Program Edit
You can record from a CD, VIDEO CD, tape or radio. You can use TYPE I (normal) tapes. The
recording level is adjusted automatically.
1 Load a recordable tape into deck B.
2 Press CD. Press CD, TAPE A/B or TUNER/BAND.
3 Load the CD/VIDEO CD you want
to record.
Load the CD, VIDEO CD or tape, or tune
in the station you want to record.
4 Press CD SYNC. Press REC PAUSE/START.
Deck B stands by for recording.
REC PAUSE/START button flashes.
5 Press DIRECTION repeatedly to select g to record on one side. Select j
(or RELAY) to record on both sides.
6 Press REC PAUSE/START. Press REC PAUSE/START, and then start
playing the desired source.
To stop recording
Press x.
Tips
• If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
hH (or nN on the remote) to start playback
of the reverse side, then press x to start recording.
The TAPE B reverse indicator lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• For recording from the radio:
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Note
You cannot listen to other sources while recording.
Steps Recording from a CD/VIDEO CD
(CD Synchro Recording)
Recording from a CD/VIDEO CD/tape/
radio manually