Sony MHC-GZR333i Stereo System User Manual


 
MHC-GZR333i/LBT-LCD77Di.GB.4-181-572-11(1)
88
GB
To adjust the graphic equalizer and
store the user equalizer setting
You can adjust the sound by raising or
lowering the level of specic frequency
band, then store up to three user
equalizer settings, in the memory.
1
Press EQ BAND/MEMORY on the
unit repeatedly to select a frequency
band or surround eect.
2
Press / to adjust the level or
select surround eect you want.
Equalizer level
3
Repeat steps 1 and 2 to adjust the
level of other frequency bands and
surround eect.
4
Press ENTER.
“MEMORY EQ-1” appears in the
display.
5
Press / to select a user
equalizer number (1 – 3) for the
equalizer setting (“MEMORY EQ-1”
through “MEMORY EQ-3”) you want
to store.
6
Press ENTER.
is setting is automatically stored as
the user equalizer setting you selected
in step 5.
e previous setting stored at this
memory location is erased and
replaced by the new setting.
Tip
If you do not want to store the setting, press
/ to select “EXIT?” and then press
ENTER.