Filter
Top Products
8
To tune in a station with a weak
signal
When the desired station is skipped during
automatic tuning, press + or – repeatedly in
step 2 to tune in the station manually.
To change the preset number
Start over from step 1.
To change the AM tuning interval
(for models with the AM TUNING STEP
switch on the rear panel)
The AM tuning interval is factory-preset to
9 kHz (10 kHz in some areas). To change the
AM tuning interval, turn off the power and
set the AM TUNING STEP switch on the rear
panel to 10 kHz (or 9 kHz). Then turn the
power back on. When you change the
interval, all the preset stations will be erased.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Step 3: Presetting radio stations
(continued)