Filter
Top Products
26
Selecting tape length
automatically
—Tape Select Edit
You can check the most suitable tape length
for recording a CD. Note that you cannot use
Tape Select Edit for discs containing over 20
tracks.
1 Place a CD on the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP
repeatedly so that it lights green.
2 Press FUNCTION repeatedly until
“CD” appears in the display.
3 Press EDIT/DIRECTION once so
that “EDIT” flashes.
The required tape length for the
currently selected CD appears, followed
by the total playing time for sides A and
B respectively.
Recording CDs by specifying the
track order (continued)
Note
You cannot use this function after programming.
In order to use this function, you must first erase the
program (see “Clear the entire program” in the table
on page 23).
1
23
DISC SKIP