Filter
Top Products
5
AM
FM
(75 )
2
Connect the FM/AM antennas.
Set up the AM loop antenna, then
connect it.
Jack type A
Jack type B
3
Set VOLTAGE SELECTOR to
position of your local power line
voltage (for models with a voltage
selector).
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the plug on this unit does not fit your
wall outlet, attach the supplied plug
adaptor (for Asian model).
5
Deactivate the demonstration mode
by pressing DISPLAY/DEMO when
the system power is turned off.
The demonstration mode is also
deactivated when you set the time.
Inserting two size AAA (R03)
batteries into the remote
Tip
With normal use, the batteries should last for about
six months. When the remote no longer operates
the system, replace both batteries with new ones.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
Extend the FM lead
antenna horizontally.
AM loop
antenna
Extend the FM lead
antenna horizontally.
AM loop
antenna
AM
FM
(75 )
VOLTAGE
SELECTOR
110-120V
220-240V