Filter
Top Products
39
7 Program additional discs or tracks.
8 Press CD SYNCHRO.
Deck B stands by for recording and the
CD player stands by for playback. (
(for front side) lights up.
9 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
10 Press P PAUSE.
Recording starts.
To stop recording
Press p.
To check the program
Press CHECK repeatedly. After the last track,
“-END-” appears.
To clear a specific track or disc
Press CHECK repeatedly to display the step
you want to clear, then press CLEAR.
To clear the entire program
Press and hold CLEAR.
To exit the program mode
Press CONTINUE.
Tips
•If a track is cut off during recording on both sides
(because the tape ended while recording on the A
side), the track will automatically be recorded
from the beginning on the B side.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY-NR so
that “DOLBY NR” appears after pressing CD
SYNCHRO.
To program
Other discs
Other tracks on the same disc
Other tracks on other discs
Repeat Steps
4 and 6
5 and 6
4 to 6