Filter
Top Products
26
Looping part of a CD
— Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
Flashing part of a CD
— Flash
With the flash function, you can “flash” the
CD sound during playback. This lets you
create original recordings.
DJ Effects
, Press and hold LOOP during
playback at the point you want to
start the Loop function, and release
to resume normal play.
To adjust the loop length
Press MENU +/– while holding LOOP on the
remote (or press b/B while holding LOOP*)
to select different LOOP lengths (LOOP
1~20).
* For European and North American models only.
jJ
lL
hH S s
HSs
LOOP
MENU +/–
LOOP*
b/B
, Press and hold FLASH during
playback at the point you want to
start the Flash function, and release
to resume normal play.
To adjust the flash length
Press MENU +/– while holding FLASH to
select different flash lengths (FLASH 1~20).
To use LOOP and FLASH together
Press and hold both LOOP and FLASH at the
same time.
Notes
•The loop and flash length cannot be adjusted
during this operation. Adjust the loop and flash
lengths independently beforehand if necessary.
•To record the loop or flash effect, use the tape
deck on this unit.
jJ
lL
hH S s
HSs
FLASH
MENU +/–