Filter
Top Products
12
Recording a CD
— CD Synchro Recording
The CD SYNC HI-DUB button lets you record
from a CD to a tape easily. You can use TYPE
I (normal) tape.
1 Press Z and insert a recordable tape
into deck B.
2 Press CD.
3 Press Z OPEN/CLOSE and place a
CD.
Then, press Z OPEN/CLOSE again to
close the disc tray.
When the CD you want to record is not
selected, press DISC SKIP EX-CHANGE
repeatedly to select the CD you want.
4 Press CD SYNC HI-DUB.
Deck B stands by for recording and the
CD player stands by for playback. The
REC PAUSE/START button flashes.
5 Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN to start playback of the reverse side, then
press x where you want to start recording. TAPE
B reverse side indicator lights up (see page 16).
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing CD
SYNC HI-DUB (MHC-BX9/DX9 only).
Note
You cannot listen to other sources while recording.
With the label
side up. When
you play a CD
single, place it
on the inner
circle of the
tray.
With the side
you want to
record facing
forward
14
35
DISC SKIP
EX-CHANGE
6
x
DOLBY NR
2
?/1
(Power)