Filter
Top Products
Basic Operations
15
Playing a tape
You can use TYPE I (normal) tape. You can
also use the ./> (AMS* function)
button to quickly search for songs you want
to hear. To select either deck A or B, press
TAPE A/B repeatedly.
* AMS (Automatic Music Sensor)
3 Press Z and insert a recordable tape
into deck B.
4 Press REC PAUSE/START.
Deck B stands by for recording.
5 Press DIRECTION repeatedly to
select g to record on one side.
Select j (or RELAY) to record on
both sides.
6 Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Tips
•If you want to record from the reverse side, press
TAPE A/B to select deck B after step 1. Press
nN to start playback of the reverse side, then
press x where you want to start recording. TAPE
B reverse side indicator lights up (see page 16).
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, use + and – (or
TUNING +/– on the remote) in step 2 to tune in
the desired station manually.
•When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR” appears after pressing REC
PAUSE/START in step 4 (MHC-BX9/DX9 only).
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
With the side
you want to
record facing
forward
continued
jJ
lL
hH S s
HSs
VOL +/–
nN
x
.>
mM
1
DOLBY NR
3
22
1
.
X
x
>
4
?/1
(Power)