Filter
Top Products
A stereo FM program cannot be received in
stereo.
• Press FM MODE (or STEREO/MONO for MHC-
GX25 and MItC-RG220 (except for European
and Russian molls)) until "MONO" disappears.
Tape deck
The tape does not record or play, or there is a
decrease in sound level.
• The he_ds ore dirty. Clean them (p_ge 30).
• The record/playback heads are magnetised.
Demagnetise them (page 3(I).
The tape does not erase completely.
• The record/playback heads are m_gnetised.
Demagnetise them (page 30).
There is excessive wow or flutter, or the sound
drops out.
• The c_ps_ans or pinch rollers are dirty. Clean them
(p_ge 30).
Noise increases or the high frequencies are
erased.
• The record/playback heads are m_gnetised.
Demagnetise them (page 30).
The tape does not record.
• No cassette is loaded. Load a cassette.
• The tab has been removed from the cassette.
Cover file broken tab with adhesive t_pe
(p_ge 30).
• The t_pe has wound to the end.
One of the following messages may appear or
flash in the display during operation.
CD/MP3
NO DISC
There is no disc in tile player.
OVER
You have reached tile end o|'_he disc while pressing
during playback or pause.
If the system still does not
operate properly after performing
the above measures, reset the
system as follows:
1 Disconnect the power cord.
2 Reconnect the power cord.
3 Press I, GROOVE and I/_ at the same
time.
4 Press I/(_ to turn on the system.
The system is reset to the factory settings. You
should set the settings you made, such as lhe
preset stations, clock, and timer.
28