Filter
Top Products
-- Program Play
You can make a program of up to 25 sieps from
all the discs in the order you want |o play lhem.
You can synchm record the programmed tracks
onto a cassette tope (page 17).
MP3 audio tracks cannot be played on
MHC-GX25 and MHC-RG220 (except for
European and Russian models).
Using the display window
1 Press CD.
2 Press PLAY MODE in stop mode
repeatedly until "PGM" appears.
3 Press D.SKIP (or DISC 1 - 3 or DISC
SKIP/EX-CHANGE on the unit) to select
a disc.
To progrom all the tracks on a disc at once,
proceed to step 5 with "AL" displayed.
4 Press P<<I or _ repeatedly until the
desired track number appears.
When programming an iVlP3, press
ALBUM or + to select album, then press
or _ repeatedly until the desired
track number appears.
Disctraynumber Selected track number
O Program additional discs or tracks.
TOprogram Repeat steps
Other discs 3 and 5
Other tracks onthe 4 and 5
same disc
Other tracks on 3to 5
other discs
7 Press I=,_.
Program Play starts.
Other operations
To DOthis
Cancel Program Press PLAY MODE in stop
Play mode repeatedly until "PGM"
disappears.
Clear a track t_om Press CLEAR in stop mode.
the end
Tips
• Tile program you made remains aider Program Play
finishes. To play the same program again, press CD,
then press I1_. Ilowever, lhe program is cleared
when you open the disc tray.
• "appears when the tolal CD program time
exceeds 100 minutes, or when you select a CD track
whose number is 21 or over, or when you select an
MP3 audio track.
T
otalptay ngt me
(includingselected track)
5 Press ENTER.
The track is progrm_amed.
The program step number appears,
followed by lhe total playing time.
12 G8