Filter
Top Products
Basic Operations
21
3 Press TAPE A ( or TAPE B ( (or
DECK A ( or DECK B ( on the
remote).
Press TAPE A 9 or TAPE B 9 to play
the reverse side. (Press DECK A ( or
DECK B ( again on the remote to play
the reverse side.) The tape starts playing.
* The deck stops automatically after repeating the
sequence five times.
**Relay play always follows the following sequence:
Deck A (front side), Deck A (reverse side), Deck B
(front side), Deck B (reverse side).
To Do this
Stop play Press p.
Pause Press PAUSE (or P on the
remote). Press again to
resume play.
Fast-forward Press 0 or ).
Rewind Press 0 or ).
Remove the cassette Press §.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
Tips
• Pressing TAPE A 9( or TAPE B 9( when
the system is off automatically turns the system on
and starts tape playback if there is a tape in the
deck (One Touch Play).
• You can switch from another source to the tape
deck just by pressing TAPE A 9( or TAPE B
9( (Automatic Source Selection).
Searching for the start of the
current or the next track (AMS)
During play, turn the jog dial to the same
direction as the 9 or ( indicator to go
forward. “TAPE A (or TAPE B) >>> +1”
appears. Turn to the opposite direction to go
back. “TAPE A (or TAPE B) <<< –1” appears.
(Or press = or + on the remote.)
Notes
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between songs is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
– When the unit is placed near a television. (In this
case, we recommend moving the unit farther away
from the television or turning off the television.)