Filter
Top Products
18
+=
Tips
•Pressing TUNER/BAND when the system is off
automatically turns the system on and tunes to the
last received station (One Touch Play).
•You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
•When an FM program is noisy, press
STEREO/MONO so that “MONO” appears in the
display. There will be no stereo effect, but the
reception will improve. Press the button again to
restore the stereo effect.
•To improve broadcast reception, reorient the
supplied antennas.
Preset number Frequency
1 Press TUNER/BAND repeatedly
until the band you want appears in
the display.
Every time you press the button, the
band changes as follows:
FM ˜ AM
2 Turn the jog dial (or press = or
+ on the remote) to tune in the
desired preset station.
To Do this
Turn off the radio Press 1/u.
Adjust the volume Turn VOLUME (or press
VOL +/– on the remote).
To listen to non-preset radio
stations (from front panel only)
Use manual or automatic tuning in step 2.
For manual tuning, press + or – repeatedly.
For automatic tuning, press and hold + or –.
Turn counter-
clockwise
(or press =
on the remote)
for lower
preset
numbers.
Turn clockwise
(or press +
on the remote)
for higher
preset
numbers.
Listening to the radio
(continued)
VOLUME
MHz
kHz
ALL DISCS
ß