Filter
Top Products
Basic Operations
19
1
364
5
p
2
+=
VOLUME
MHz
kHz
ALL DISCS
ß
Recording from the
radio
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) tapes.
1 Press TUNER/BAND to select the
band you want.
2 Turn the jog dial (or press = or
+ on the remote) to tune in a
preset station.
Turn clockwise
(or press +
on the remote)
for higher
preset numbers.
Turn counter-
clockwise (or
press = on
the remote) for
lower preset
numbers.
Preset number Frequency
3 Press § and insert a blank tape into
deck B.
4 Press REC.
Deck B stands by for recording. The
indicator on TAPE B ( (for front side)
lights up.
5 Press DIRECTION repeatedly to
select A to record on one side.
Select ß (or RELAY) to record on
both sides.
6 Press PAUSE.
Recording starts.
To stop recording
Press p.
Tips
•If you want to record from the reverse side, press
TAPE B 9 to light its indicator after pressing
REC in step 4.
•When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
•To record non-preset stations, use + and – in step 2
to tune in the desired station manually.
•If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
With the side
you want to
record facing
forward
1/u (Power)
§