Filter
Top Products
45
GB
Using the CONTROL A1
ΙΙ
control system
Other Functions
Synchronized recording
This function lets you conduct synchronized recording
between the MD deck and selected source component.
1
Set the source selector on the amplifier (or
receiver) to the source component.
2
Set the source component to playing pause mode
(make sure both the N and X indicators light
together).
3
Set the deck to recording pause mode.
4
Press X on the deck.
The source component is automatically released from
pause mode, and recording begins shortly thereafter.
When play ends from the source component, recording
stops.
z
You can use a special synchronized recording
This MD deck is equipped with a special synchronized recording
function that uses the CONTROL A1
ΙΙ
Control System (see
“Making a CD Synchro-recording from a Sony CD player
connected with a control A1
ΙΙ
cable” on page 22).
Note
Do not set more than one component to the pause mode.