Filter
Top Products
41
GB
Fading in and fading out/Falling asleep to music
Other Functions
z
You can change the duration of Fade-in and Fade-out
Play/Recording
1 While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2 Turn AMS (or press ./> repeatedly) to select the
setting, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) to select the
duration, then press AMS or YES.
Both the Fade-in and Fade-out durations can be set in 0.1
second steps.
4 Press MENU/NO.
Falling asleep to music
(Sleep Timer)
You can set the deck so that it turns off automatically after
a specified duration.
1
While the deck is stopped, press MENU/NO twice.
“Setup Menu” appears in the display.
2
Turn AMS (or press ./> repeatedly) until
“Sleep Off” appears in the display, then press AMS
or YES.
3
Turn AMS (or press ./> repeatedly) to select
the setting, then press AMS or YES.
4
Turn AMS (or press ./> repeatedly) until
“Sleep 60min” appears in the display, then press
AMS or YES.
5
Turn AMS (or press ./> repeatedly) to select
the time to be turned off (“30min,” “60min” (factory
setting), “90min,” or “120min”), then press AMS or
YES.
6
Press MENU/NO.
To turn off Sleep Timer
Repeat the procedure above, selecting “Sleep Off” in step
3.
z
You can check the remaining time
Once you turn on Sleep Timer, the remaining time is displayed
when you select “Sleep” in Setup Menu.
To change the duration of Select
Fade-in Play/Recording F.in
Fade-out Play/Recording F.out
To Select
Turn on Sleep Timer Sleep On
Turn off Sleep Timer Sleep Off (factory setting)
AMSMENU/NO YES