Filter
Top Products
Playing MDs
32
EN
Falling Asleep to Music
You can let the deck turn off at the specified time, so
you can sleep to the music.
You can specify the time to be turned off by
30 minutes.
1 Press MENU/NO twice to display “Setup Menu”.
2 Turn AMS to select “Setup 14”, then press AMS.
3 Turn AMS to select the time.
The minutes display changes as follows:
30min ˜ 60min ˜ 90min ˜ 120min
4 Press AMS.
5 Turn AMS to select “Setup 15”, then press AMS.
6 Turn AMS to select “Sleep On”, then press AMS.
“SLEEP” lights up in the display.
7 Press MENU/NO.
To change the time to turn off
Start over from Step 1 above.
To cancel the Sleep Timer Function
Select “Sleep Off” in Step 6 above, then press AMS.
Changing the Pitch (Pitch
Control Function)
You can change the MD playback speed (pitch). The
tone rises at higher pitches, and falls at lower pitches.
Setting the pitch automatically in steps
(Auto Step Control Function)
Each step changes the musical scale by a half-tone*.
You can increase the pitch by up to 2 half-tones or
lower the pitch by up to 48 half-tones.
* One octave equals 12 half-tones.
1 While the deck is playing, press MENU/NO twice
to display “Setup Menu”.
2 Turn AMS to select “Setup 10”, then press AMS.
3 Turn AMS to select the desired pitch step, then
press AMS.
4 Press MENU/NO.
Notes
• When you change the pitch control step, the playback
sound drops out momentarily.
• The step control setting returns to the initial value (0)
when you turn off the deck or eject the MD.
• When a dot (.) appears to the right of the step value in the
step display as shown below, this indicates that you have
performed fine adjustment (see the next page) and the
pitch value is between steps. (The step and fine control
values are linked.)
Pp
0
)
r
§
·
≠ AMS ±
MENU/NO
Pp
0
)
r
§
·
≠ AMS ±
MENU/NO