Filter
Top Products
SONY MDR-DS8000 (GB) 3-238-629-11(1) CEK/CED/UC2
Connection
13
GB
Connecting the processor to digital
components
Use the supplied optical digital connecting cable to connect the optical digital output
jack on a DVD player (or LD player), Digital TV, or other digital component to the
DIGITAL IN 1 or 2 jack of the processor.
To DIGITAL
IN jack
Processor
DVD player, LD player, BS digital
tuner, or other digital component
having an optical digital output
jack
To optical
digital
output jack
Optical digital connecting
cable (supplied)
Match the orientation of
the plug with the jack, and
then insert until the plug
fits into place.
Notes
• The optical digital connecting cable is an extremely high-precision device and is sensitive to
jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.
• This system is not provided with AC-3 RF jacks, and so AC-3 RF signals from LD players
cannot be directly input.
• The digital input for the processor does not support sampling frequencies of 96 kHz. Set the
digital output setting for the DVD player to 48 kHz when using this system. Noise may be
heard when a 96 kHz digital signal is input.
DTS
• A DTS-compatible DVD player is required for the playback of DVDs recorded in DTS audio.
(For more details, see the instruction manual of the DVD player.)
• When playing LDs and CDs recorded in DTS format, noise may occur when fast forwarding or
rewinding. This is not a malfunction.
• If the DTS digital output is set to “OFF” on the DVD player, no sound may be heard even if the
DTS output is selected in the DVD menu.
• No sound may be heard when a DVD player and this unit is analogue connected. In this case,
use a digital connection.
(Continued)
(sold separately)