Filter
Top Products
Installing the TV
11
Cable and Antenna If your cable provider does not feature local channels, you may find
this set up convenient.
Select CABLE or antenna (ANT) mode by pressing
ANT on the remote
control.
Basic Cable Box
Connections
Cable Box and Cable
This is the preferred basic cable TV hookup to use if:
❑ Your cable TV company scrambles some channels, but not all of
them (pay channels vs. regular cable channels), and you need to
use a cable box, and
❑ You want to enjoy the PIP feature.
With this setup you can:
❑ Use the TV remote control to change channels using your cable
box when the signal is scrambled.
❑ Use the TV remote control to change channels using your TV
when the signal is not scrambled. (Your TV’s tuner provides a
better signal than the cable box.)
❑ Use the PIP feature. (When all channels are routed through your
cable box, only one signal is sent to the TV, so you cannot use the
PIP feature.)
✍ This connection applies to all models except KV-36FS12.
✍ To receive channels with an antenna, you need to turn your Cable to OFF (see
page 40) and perform the Auto Program function (see page 41).
Rear of TV
AUX
TO CONVERTER
VHF/UHF
Antenna cable
(No connection to
CATV cable
TO CONVERTER)
✍ This connection applies to all models except KV-36FS12.
(Continued on the next page)