Filter
Top Products
Installing the TV
9
Back Panel Descriptions
Connection Description
1AUX
(except
KV-36FS12)
Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX
input cannot be viewed in PIP.
2TO CONVERTER
(except
KV-36FS12)
This is a VHF/UHF out jack that lets you set up your TV
to switch between scrambled channels (through a cable
box) and normal cable channels (CATV). Use this jack
instead of a splitter to get better picture quality when
needing to switch between scrambled and unscrambled
cable channels.
3VHF/UHF Connects to your VHF/UHF antenna or cable.
4S VIDEO Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
5MONITOR OUT
(except models
KV-36FS12 and
36FS16)
Lets you record the program you are watching to a VCR.
When two VCRs are connected (see page 17), you can
use your TV as a monitor for tape-to-tape editing.
6AUDIO (L/R)/
VIDEO
Connects to the audio and video OUT jacks on your VCR
or other video component. A third video input (VIDEO
2) is located on the front panel of the TV. The Audio and
Video IN jacks provide better picture quality than the
VHF/UHF jack.
7AUDIO OUT
(VAR/FIX)
L (MONO)/R
Connects to the left and right audio inputs of your audio
or video component. You can use these outputs to listen
to your TV’s audio through your stereo system.
8S-LINK
CONTROL S IN/OUT
(except models
KV-36FS12 and
36FS16)
Allows the TV to receive (IN) and send (OUT) remote
control signals to other Sony infrared-controlled audio or
video components.
9Y, P
B, PR, L, R Connects to your DVD player’s or Digital Set-top box’s
component video (Y, P
B, PR) and audio (L/R) jacks.