Listening to the radio22
GB
Presetting stations
— Preset tuning
There are a total of 10 pages available for presets (page 0 to page 9) and
you can preset up to 10 stations per page for a maximum of 100 preset
stations. By presetting, you can tune in to stations simply by using the
number buttons (0 to 9).
Convenient way using preset tuning
For short wave (SW) broadcasts, frequencies available for
reception differ depending on the time and period even for the
same station. Presetting different frequencies for the same station
on a page will allow you to tune in to that station easily by using
the memory scan tuning (page 24).
(For frequencies of each station, see the supplied Wave
Handbook.)
Presetting and changing the stations
Frequencies may already be preset in the memory at the time of
purchase. In this case, erase or change the unnecessary stations.
1 Press POWER ON/OFF to turn on the radio.
2 Tune in to the station you want to preset.
For details concerning tuning, see Direct tuning (page 16), Manual
tuning (page 18) or Auto scan tuning (page 20).
3 Press PAGE and press a number button between 0 and
9 to select a page number.
The number will change from a flashing
display to a constant display and the page
number will be determined.
4 Hold down ENTER and press a number button
between 0 and 9 to select a preset number.
Two short beeps will be heard and the
PRESET indicator will change from a
flashing display to a constant display. The
frequency will be stored in the selected
preset number.
The example shows AM 594 kHz is stored in
preset number 1 of page number 1.
Note
If a station has already been stored to the button you chose, it will
be overwritten by the new preset.
1
3, 4
3
4