Filter
Top Products
Listening to the radio20
GB
Searching the station
automatically
— Auto scan tuning
1
2
6
3
3, 4, 5
1 Press POWER ON/OFF to turn on the radio.
2 Press FM/AM to select either band.
To listen to SW, MW or LW broadcasts, select AM.
3 For AM bands, hold down AM BAND and press
–
?K
or k?
+
to select MW (medium wave), LW (long wave)
or meter band (short wave).
The lowest frequency of the band (meter band) will appear in the
display each time the button is pressed.
For FM, skip this step.
4 Hold down
–
?K or k?
+
for about 2 seconds. Release
when the unit starts scanning.
Stations will be searched automatically. The unit will stop at each
reception and will resume scanning after about 3 seconds (auto
scan tuning).
The unit will scan within the frequency range of the chosen band
or meter band (see “Frequency range of bands/meter bands”, page
19).
5 When the unit tunes in to the desired broadcast, press
the outer
–
?K or k?
+
.
Auto scan will stop at that broadcast station.
6 Press the inner K
–
or
+
k to adjust to the optimum
frequency.