Filter
Top Products
47
GB
Other Playback Operations
Making the human voice
clearer – the noise cut
function
When the noise cut function is set to “ON”
in the menu, the distortion of very low and
high frequencies which are outside the
human voice range is reduced, therefore
you can hear the human voice more clearly.
1 Press MENU to enter the menu mode
when the IC recorder is in the stop or
playback mode.
The menu mode window will be
displayed.
2 Press v or V on the control button to
select “Noise Cut,” and then press
N/
ENT.
3 Press v or V on the control button to
select “ON,” and then press
N/ENT.
4 Press x STOP to exit the menu mode.
PNotes
• The effect of the noise cut function may be
different depending on the condition of the
recorded voice.
• When you are using the built-in speaker or
listening to the FM radio, the noise cut
function does not work.
To cancel the noise cut function
Set “Noise Cut” to “OFF” in step 3.
N/ENT
MENU
v, V
x
STOP