Filter
Top Products
42
GB
Other Playback Operations
Changing the Playback Method
Convenient playback
methods
Listening with better sound
quality
• To listen with the headphones:
Connect the supplied headphones to the
i (headphone) jack. The built-in speaker
will be automatically disconnected.
• To listen from an external speaker:
Connect an active or passive speaker (not
supplied) to the i (headphone) jack.
Quickly locating the point you
wish to start playback (Easy
Search)
When “Easy Search” is set to “ON”
(page 76) in the menu, you can quickly
locate the point at which you wish to start
playback by pressing
> or . on the
control button repeatedly during playback.
You can go back approx. 3 seconds by
pressing
. on the control button once, or
advance approx. 10 seconds by pressing
> on the control button once. This
function is useful for locating a desired
point in a long recording.
Searching forward/backward
during playback (Cue/Review)
• To search forward (Cue):
Press and hold
> on the control button
during playback and release it at the point
you wish to resume playback.
• To search backward (Review):
Press and hold
. on the control button
during playback and release it at the point
you wish to resume playback.
The IC recorder searches at slow speed with
playback sound. This is useful to check one
word forward or back. Then, if you press
and hold the button, the IC recorder starts to
search at higher speed.
z When messages are played back
to the end of the last message
• When you play back or fast play back to the
end of the last message, “MESSAGE END”
lights up for approx. 5 seconds.
• When “MESSAGE END” and the operation
indicator go off, the IC recorder will stop at
the beginning of the last message.
• If you press and hold
. on the control
button
while “MESSAGE END” is lit, the
messages are played back rapidly, and