Filter
Top Products
10
US
Use the supplied remote control to operate this
receiver and other equipment. The remote
control is assigned to operate Sony audio/
video equipment. You can reassign the input
button to match the equipment connected to
your receiver (page 38).
RM-AAU120
To use the buttons printed in
pink
Hold down SHIFT (O), then press the button
printed in pink that you want to use.
Example: Hold down SHIFT (O), then press
ENTER (C).
To control the receiver
B ?/1
1)
(on/standby)
Turns the receiver on or sets it to standby mode.
Saving the power in standby mode
When “CTRL HDMI” is set to “CTRL OFF”
(page 40).
C Input buttons
2)
Selects the equipment you want to use. When
you press any of the input buttons, the receiver
turns on. The buttons are assigned to control
Sony equipment.
Numeric buttons
2)
Hold down SHIFT (O), then press numeric
buttons to preset or tune to the preset stations
(page 31).
ENTER
Hold down SHIFT (O), then press ENTER to
– enters the selections.
– stores a station during tuner operation.
D D.TUNING
Enters direct tuning mode (page 30).
E MEMORY
Stores a station during tuner operation.
F DISPLAY
Press AMP MENU, then press DISPLAY to
view information on the display panel (page 29).
Remote control
.
mM
>
X
x
O
MENU
BD/DVD GAME
SAT/
CATV
VIDEO
TUNER
DMPORT
TV
LINE IN
qh
qj
qk
ql
wg
wh
wa
wd
wf
w;
ws
1
2
3
4
6
0
8
7
9
qs
qd
qf
qg
5
qa
TUNER
DMPORT
2 Press
ENTER
1 Hold down
SHIFT