Filter
Top Products
74
GB
Speaker section
•Front speaker (SS-MSP7500)
Speaker system 2-way, 3-driver, Bass
reflex, Magnetically
shielded
Speaker unit
Woofer: 200 mm, cone type × 2
Tweeter: 25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
325 × 980 × 340 mm
(with foot)
Mass (Approx.) 13.5 kg
•Center speaker (SS-CNP7500)
Speaker system 2-way, 3-driver, Bass
reflex, Magnetically
shielded
Speaker unit
Woofer: 100 mm, cone type × 2
Tweeter: 25 mm, horn type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
515 × 175 × 245 mm
(with foot)
Mass (Approx.) 4.7 kg
•Surround/Surround back speaker
(SS-SRP7500)
Speaker system Full range, Bass reflex
Speaker unit
Woofer: 100 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
174 × 220 × 180 mm
(with foot)
Mass (Approx.) 1.6 kg
•Subwoofer (SS-WP7500)
Speaker system Bass reflex, Magnetically
shielded
Speaker unit 250 mm, cone type
Rated Impedance 6 ohms
Dimensions (width/height/depth) (Approx.)
335 × 420 × 330 mm
(with foot)
Mass (Approx.) 7.9 kg
Supplied speakers
Front speaker (2)
Center speaker (1)
Surround speaker (2)
Surround back speaker (1)
Subwoofer (2)
Supplied accessories
Operating instructions (this manual)
Quick Setup Guide (1)
FM wire antenna (1)
AM loop antenna (1)
Monaural audio cord (1)
Coaxial digital cord (1)
System control cable (1)
Speaker cords
• Long (3)
• Short (5)
Foot pads
• Speakers (16)
• Subwoofer (8)
Optimizer microphone (ECM-AC2 or
ECM-AC2a) (1)
Remote commander (RM-AAU027) (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to
change without notice.
For details on the area code of the
component you are using, see page 3.
Halogenated flame retardants are not used in
the certain printed wiring boards.