Filter
Top Products
72
GB
If you are unable to remedy the
problem using the
troubleshooting guide
Clearing the receiver’s memory may remedy
the problem (page 30). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
Specifications
Amplifier section
•Receiver (STR-KM5500)
Power Output
Models of area code SP, MX, E51, AR, TH1, SA,
EA
Stereo mode output (rated) (6 ohms, 1 kHz,
THD 1%)
100 W + 100 W
1)
90 W + 90 W
2)
Surround mode output (reference)
3)
RMS output
FRONT: 185 W per channel
1)
170 W per channel
2)
(with SS-MSP7500)
CENTER: 185 W
1)
170 W
2)
(with SS-CNP7500)
SURROUND: 185 W per channel
1)
170 W per channel
2)
(with SS-SRP7500)
SURROUND BACK:
185 W
1)
170 W
2)
(with SS-SRP7500)
•Power amplifier (TA-KMSW500)
RMS output (6 ohms, 80 Hz, THD 10%)
200 W per channel
1)
185 W per channel
2)
Input LINE IN (input pin jacks)
1)
Measured under the following conditions:
2)
Measured under the following conditions:
Reference sections for clearing
the memory
To clear See
All memorized settings page 30
Customized sound fields page 55
Area code Power requirements
E51, SP, SA 240 V AC, 50 Hz
MX, EA 127 V AC, 60 Hz
AR, TH1 230 V AC, 50 Hz
Area code Power requirements
AR, TH1 220 V AC, 50 Hz